SpECcoat BC121

SpECcoat BC121 is a non-slumping epoxy bedding compound and adhesive. It is a two-component epoxy based mortar filled with selected fine aggregate. It is a fast curing material, ideal for a variety of bedding, gap filling and concrete repair applications.

SpECcoat BC121 is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give excellent
mechanical properties, typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most common corrosive chemicals. It does not shrink on curing and is designed to be used when cured from below freezing point to 60°C. Its impact resistance and mechanical strength is greater than that of concrete.

TYPICAL USES
SpECcoat BC121 is designed for surface repairs of fine cracks and spalls. For gap filling, grouting, bedding fixtures etc. For repair to arises without the use of formwork. The product should be used to fill defects prior to overcoating with SpECcoat or SpECtop products.

SpECcoat BC121 can be used in a range of applications such as:

• Bedding bridge beams or steel bridge bearings
• Repairing surface defects or honeycombing of concrete in horizontal, vertical or overhead situations
• Fixing slip bricks to concrete
• Securing bolts into walls
• Dowel bars anchoring
• As a gap filling adhesive
• Filling bolt pockets
• Repairing concrete posts in-situ
• Fixing of surface ports for crack injection

Supplied in 3 and 5kg units. Can be applied from 0-20mm depending on the application at 1.75kg/m² (BC) and 1.45kg/m² (BC121) per mm thickness. Primer not required.